Corning Cable Systems Closet Connector Housings (CCH) provide interconnect or cross-connect capabilities between the outside plant, riser, or distribution cables, and the opto-electronics.
The unit can be rack-mounted in 19-in (48 cm) or 23-in (58 cm) equipment racks (1.75-in EIA hole spacing) and occupies four-rack-space. This unit accepts up to 12 Corning Cable System CCH series connector panels or modules.
Documentation labels are provided and units or components can be added as needed to construct a fiber distribution frame for any application.
The CCH has been designed with an open top, located in the front of the housing. The opening, when used in conjunction with the Closet jumper Management Panel (CJP), facilitates jumper routing.
Features:
Optional items available:
HDWR-LOCK-KIT: Lock kit for front door of housing; contains one lock and two keys
FDC-CABLE-GRND: Armored cable grounding kit; contains armor grouding clip and ground strap
CJP-01U: Closet jumper management panel; provides jumper management in a 1.75 inch rack space
CJP-02U: Closet jumper management panel; provides jumper management in a 3.5 inch rack space
Note:
CCH series connector panels and modules must be ordered separately.
This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125µm, 140µm and 230µm cladding.
The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool. Components are for stripping fiber coating/buffer up to 900µm, and jackets up to 3.5 mm.
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC and MU connectors.
Specifications:
Note:
This doesn't work with APC angled connectors. Please check
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC/APC connectors.
Specifications:
Note:
This doesn't work with PC connectors. Please check
This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900µm tight buffer coating to 125µm fiber cladding.
(It doesn't work on 250µm or 400µm coating. Additional fiber guide, fiber guide lock and blade set need to be ordered separately)
This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.
This tool is AA battery-operated for field work, hard to reach areas or for quick fixes.It comes with a blade cleaning brush and a component removal and insertion tool.
