ADAPTERS PANELS

Note: The OLPS-4RM-DD chassis includes two OLPS-4RM-DC48 power supplies with DC 36-72V input. OLPS-35 protection cards are NOT included with the OLPS-4RM-DD chassis.

Product description
The OLPS-4RM-DD is a high performance high density Optical Line Protection System for critical fiber optic transmission circuits. The chassis can hold up to 8 independent OLPS-35 1:1 optical protection cards. The chassis occupies 4RU of rack space offering double the density of the standalone OLPS-RM-35-AD system while bringing the cost per OLPS 1:1 protection system at the best value. The management system available on the 8 slot chassis allows management of all the OLPS-35 cards with a single IP address. The 1:1 protection system has the advantage of a very low insertion loss compared with 1+1 protection systems. The OLPS-35 cards offers only 1.2dB of insertion loss, making them a favored protection choice for tight optical budget applications.

The OLPS is an automatic system that switches fiber communication from a main fiber line to an alternate backup fiber when the main line communication is disabled. This is done by constantly monitoring the optical level of the main line. When signal level gets under a set threshold, communication is diverted on the secondary path in less than 35 miliseconds. Unit has management available via console and SNMP. Management allows set-up of threshold optical level for switching and behavior for recovery: automatic reverting to main when signal is restored, manual revert or no switch. The new OLPS-4RM chassis offers 19" rack mounting brackets with only 4RU of space used, saving vital rack space when necessary. The 8 slot OLPS rack can be loaded with OLPS-35 1:1 protection cards.

The OLPS chassis provides redundant power supply system with "hot swap" feature, to provide continuous operation. It can accomodate both AC (110V) and DC (48V) power supply units, either in mixed or same type of power input.

Technical specifications
 

Note: Picture shows a fully loaded chassis. Only the chassis is sold under this part number.

Product description
The new SML-4000-CH high density chassis occupies 4RU space in a 19" rack and holds up to 24 different/independent CWDM or DWDM mux/demux cards from the SML-40 series. Each mux/demux card can be used as standalone or can be installed in one of the SML-4000 chassis 24 slots.

The SML-4000-CH is a rack 19" solution for very high density of CWDM or DWDM filters in a telecom rack. The solution is offering unparalleled density of CWDM or DWDM filters per unit of rack space. All CWDM or DWDM filters can be customized upon customer needs according to number of channels, specific wavelengths, expansion and monitor ports and type of connectors.

Note: Only the chassis is sold under this part number.

Product description
The new SML-1000-CH chassis occupies only 1U space in a 19" rack and holds up to 4 different/independent CWDM mux/demux cards from the SML-1000 series. Each mux/demux card can be used as standalone or can be installed in one of the SML-1000 chassis 4 slots.

The SML-1000-CH is a rack 19" solution for higher density of CWDM or DWDM filters in a telecom rack. CWDM or DWDM filters can be customized upon customer needs.