Subscribe to the newsletter to receive updates about new products.
Your cart is empty!
LC male-to-female attenuators contain doped fiber suitable for both 1310nm and 1550nm operation. Fixed attenuation values are available in 1dB increments from 1 to 20dB.
All Fiber Optics For Sale Co. attenuators are built with the highest quality materials and factory tested to ensure precise attenuation and performance.
ST male-to-female attenuators contain doped fiber suitable for both 1310nm and 1550nm operation. Fixed attenuation values are available in 1dB increments from 1 to 20dB.
The Air Gap Variable Attenuator has a ceramic alignment sleeve that provides a low insertion loss of .15dB and can be used on both multimode and singlemode applications. Attenuation range is 0dB to 20dB.
The attenuator comes with an included tool that provides ability to increase attenuation level to desired level
Device may replace mating sleeve at the patchpanel, enabling variable attenuation levels to be introduced to the system.
The type of variable attenuator can be installed at the distribution panels or connecting two patchcords to become in-line attenuator application. By fine tuning the air gap width, the user can easily adjust the attenuation value when using in conjunction with power meter.
The capacity ofSFM-7000-L31optical module is1.25Gbps(Gigabit rate). The XR transceiver (eXtended Range) allows operation on either50/125um or 62.5/125um multi-modefiber for up to2Kmdistance. The fiber standard for SFM-7000-L31 is1000Base-SX.All the managedFIB1-1000ESandFIB1-1000TSas well as unmanagedFMC-1000ESandFIB1-1000DSseries of standalone Gigabit media converters can be equipped with miniGBIC/SFP optical modules.SFP's or miniGBIC modules are extremely versatile, working with any active equipment that support the SFP type of interface: Ethernet switches, routers and any other networking equipment. Our SFPs have been tested and found 100% compatible with various Ethernet switches from major manufacturers like: Cisco, Nortel, Extreme, ZyXEL, D-Link or Netgear.
1x4 Single Mode PLC Splitter (Planar Lightwave Circuit Splitter) with Fan Out & SC/APC Connectors
PLC stands for Planar Lightwave Circuit. PLC splitters are used to distribute or combine optical signals. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability.
PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size, these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems.
Installation is simple using a variety of connector types or fusion splicing.
Applications:
Product Features:
Product Specs:
Product descriptionThe capacity ofSFS-7010-L31module is1.25Gbps(Gigabit rate). The transceiver is able to work on9/125um single-modefiber for up to10Kmdistance. The fiber standard for SFS-7010-L31 is1000Base-LX.All the managedFIB1-1000ESandFIB1-1000TSas well as unmanagedFMC-1000ESandFIB1-1000DSseries of standalone Gigabit media converters can be equipped with miniGBIC/SFP optical modules.SFP's or miniGBIC modules are extremely versatile, working with any active equipment that support the SFP type of interface: Ethernet switches, routers and any other networking equipment. Our SFPs have been tested and found 100% compatible with various Ethernet switches from major manufacturers like: Cisco, Nortel, Extreme, ZyXEL, D-Link or Netgear.Fiber power budget according to available models(highlighted model is one available for purchase on this page)
The Clip-On Variable Fiber Optic Attenuator is a completely passive device, which works by physical attenuation of a 3mm jacketed singlemode cable.
It may also be used with smaller jacket sizes. However, attenuation performance may vary.
The clip-on attenuator can be attached at any point in a fiber cable, providing attenuation levels from 0 to >47dB at 1550nm, 0 to >21dB at 1310nm, and low back reflection.
This attenuator is good for hundreds of uses, and leaves no lasting effects on the cable.
Dimensions: Length = 1 1/2", Diameter = 3/4"
1x32 Single Mode PLC Splitter (Planar Lightwave Circuit Splitter) with Fan Out & SC/APC Connectors
This Variable Attenuator uses collimator lens technology enabling the user to change attenuation through the twist of a top-mounted screw.
Use this variable attenuator to simulate the loss in a fiber system or testing your system's dynamic range. A power meter and light source can be used to determine the fixed attenuation value your system requires.
The attenuator has a 0.6 dB typical insertion loss and is available in a 2 meter length and may be connectorized.
Note: The OLPS-4RM-DD chassis includes two OLPS-4RM-DC48 power supplies with DC 36-72V input. OLPS-35 protection cards are NOT included with the OLPS-4RM-DD chassis.Product descriptionThe OLPS-4RM-DD is a high performance high density Optical Line Protection System for critical fiber optic transmission circuits. The chassis can hold up to 8 independent OLPS-35 1:1 optical protection cards. The chassis occupies 4RU of rack space offering double the density of the standalone OLPS-RM-35-AD system while bringing the cost per OLPS 1:1 protection system at the best value. The management system available on the 8 slot chassis allows management of all the OLPS-35 cards with a single IP address. The 1:1 protection system has the advantage of a very low insertion loss compared with 1+1 protection systems. The OLPS-35 cards offers only 1.2dB of insertion loss, making them a favored protection choice for tight optical budget applications.The OLPS is an automatic system that switches fiber communication from a main fiber line to an alternate backup fiber when the main line communication is disabled. This is done by constantly monitoring the optical level of the main line. When signal level gets under a set threshold, communication is diverted on the secondary path in less than 35 miliseconds. Unit has management available via console and SNMP. Management allows set-up of threshold optical level for switching and behavior for recovery: automatic reverting to main when signal is restored, manual revert or no switch. The new OLPS-4RM chassis offers 19" rack mounting brackets with only 4RU of space used, saving vital rack space when necessary. The 8 slot OLPS rack can be loaded with OLPS-35 1:1 protection cards.The OLPS chassis provides redundant power supply system with "hot swap" feature, to provide continuous operation. It can accomodate both AC (110V) and DC (48V) power supply units, either in mixed or same type of power input.Technical specifications
Note: Picture shows a fully loaded chassis. Only the chassis is sold under this part number.Product descriptionThe new SML-4000-CH high density chassis occupies 4RU space in a 19" rack and holds up to 24 different/independent CWDM or DWDM mux/demux cards from the SML-40 series. Each mux/demux card can be used as standalone or can be installed in one of the SML-4000 chassis 24 slots.The SML-4000-CH is a rack 19" solution for very high density of CWDM or DWDM filters in a telecom rack. The solution is offering unparalleled density of CWDM or DWDM filters per unit of rack space. All CWDM or DWDM filters can be customized upon customer needs according to number of channels, specific wavelengths, expansion and monitor ports and type of connectors.
Note: Only the chassis is sold under this part number.Product descriptionThe new SML-1000-CH chassis occupies only 1U space in a 19" rack and holds up to 4 different/independent CWDM mux/demux cards from the SML-1000 series. Each mux/demux card can be used as standalone or can be installed in one of the SML-1000 chassis 4 slots.The SML-1000-CH is a rack 19" solution for higher density of CWDM or DWDM filters in a telecom rack. CWDM or DWDM filters can be customized upon customer needs.
Are you sure you want to remove this product from cart?
