Products

This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125µm, 140µm and 230µm cladding.

The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool. Components are for stripping fiber coating/buffer up to 900µm, and jackets up to 3.5 mm.

This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.

This puck can work with LC and MU connectors.

Specifications:

• Material: Stainless Steel
• Suitable Connectors: LC, MU

Note:

This doesn't work with APC angled connectors. Please check

This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.

This puck can work with LC/APC connectors.

Specifications:

• Material: Stainless Steel
• Suitable Connectors: LC/APC

Note:

This doesn't work with PC connectors. Please check

This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900µm tight buffer coating to 125µm fiber cladding.

(It doesn't work on 250µm or 400µm coating. Additional fiber guide, fiber guide lock and blade set need to be ordered separately)

This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.

This tool is AA battery-operated for field work, hard to reach areas or for quick fixes.It comes with a blade cleaning brush and a component removal and insertion tool.

Precision Fiber Optic Strippers

• Precision Blades for Clean, Consistent Strips
• Ergonomically Designed
• High Quality
• Affordably Priced

Brand new replacement blade/cutting wheel for Fujikura CT-20 and CT-30 high precision fiber optic cleavers

Genuine Fitel Part.

OFS Fitel Lithium Battery Pack for Fusion Splicer Model:

• S177A
• S178
• S153
• S123
• S122A

Features:

• Genuine FITEL component. (Not from third party mfr.)
• FITEL model number: S943B
• Brand new
• Fits fusion splicer models: FITEL S177A, S178, S153, S123, S122A fusion splicers
• New part number is S943D

This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.

This puck can work with FC/APC connectors.

Specifications:

• Material: Stainless Steel
• Suitable Connectors: FC/APC

Note:

This doesn't work with PC connectors. Please check 8705 for FC/PC connector polishing pucks.

This is a lightweight Kevlar cutter from Miller. It is an economical choice for those installers who only do a few Kevlar cut once a while.

Features:

• Lightweight shears ideal for cutting Kevlar strength members found in fiber optic cable construction
• Ergonomic molded handles provide comfort for both right and left handed users
• One micro-serrated blade reduces slippage for more positive cutting action
• Blades made from high carbon molybdenum, and vanadium steel for long life

2-3/4" X 4" Sticky Back (Black On Orange)

8" Long Wrap Around Label (Black on Orange)

Fits 1"-2 1/2" Diameter Cable

Black on Orange

Standard Sizes: Please see above

Expected Outdoor

Durability: 7 – 10 or more years. Call for details.

Service Temperature

range: -20o F to 185o F

Available Colors: Orange, Red, Yellow, Black, Green, Blue,

and White

Ink Colors: Standard is UV- stable Black or White

Water Resistance: Excellent

Solvents Resistance: Very Good

UV Resistance: Very Good

Abrasion Resistance: Very Good

Flammability: Self- extinguishing

C-Cement is required for both cable preparation and End Plate preparation, but is not supplied with Splice Cases or End Plate Kits.

This metallic detectable fiber optic cable warning tape from Trinity Tape provides a cost effective protection against fiber breakage.

This tape is 3" wide and 1000' long in a roll. The message "CAUTION: FIBER OPTIC LINE BURIED BELOW" is imprinted on the tape.

Tyco Raychem Gator 12F Splice Closure (7.5" x 5.8" x 1.2").

The Gator splice closure is a small butt splice closure primarily designed for splicing two loose tube "flat drop" style cables of 1 to 12 fibers in above ground, below grade, and direct buried applications.

Accommodates up to 12 single fibers, 12 ribbonized fibers, or one 12 fiber ribbon. Two mounting tabs are integrated into the closure base to allow easy mounting.

Gel-Sealing Technology. Re-enterable but not re-usable.

Used in CATV and telephone aerial construction to secure cable and multipair distribution to the pole.

For use with 1/2 in. to 5/8 in. through bolts (not furnished).0.109 in. to 0.134 in. messenger size range.

Approximately 78.8 lb per 100.

Minimum Order Quantity of 50

3M Dynatel 1420-iD Electronic Marker System (EMS) Marker Locator is a microprocessor-based systems that incorporate advanced digital signal processing techniques to quickly and efficiently locate underground facilities even years after construction or maintenance.

Designed to be more accurate, faster and more integrated than ever before, the 3M Dynatel EMS iD Marker Locators allow you to accurately and easily.

• Locate, read and write to ID markers
• Pin-point the exact depth and location of all existing models of properly installed underground passive EMS markers
• Direct depth reading of ID markers
• Locate two different marker frequencies simultaneously

A new feature exclusive to the 3M Dynatel EMS iD Marker Locators is the ability to read, write and lock programmed information into the new 3M 1400 Series EMS iD Ball Markers. Information such as a pre-programmed unique identification number, facility data, owner information, application type, placement date and other details from up to 100 ID markers can all be read, stored with date/time stamp and transmitted back to your PC through a standard RS232 serial port for enhanced resource management.

3M Dynatel EMS iD Marker Locators are unaffected by metal conduit or pipe, metallic conductors, fences, AC power or electronic markers for other utilities. Multiple ID markers located at close proximity can be read individually using the new system.

Lightweight and compact, the 3M Dynatel EMS iD Marker Locators are rugged, ergonomic and require very little operator training. A large backlit digital liquid crystal display (LCD) screen and soft-key operation make them easy to understand and use for more precise locates. A memory feature remembers operator set-up from previous use. A standard RS232 communications port allows interfacing to an external computer for uploading/downloading of data, unit configuration and remote software upgrades. The system can run over 25 hours on eight AA alkaline batteries.

Specifications:

• Receiver Size: 10.25" x 4.7" x 30"
• Receiver Weight: 4 lbs
• Operating Temperature: -20°C to +50°C
• Storage Temperature: -20°C to +70°C
• Regulatory: CE
• Standard: IP54
• Marker Compatibility: All 3M markers (telephone, gas, CATV, power, water, wastewater and general purpose)
• Dual Marker Mode: Any two marker frequencies simultaneously
• Detection Range: Exceeds maximum marker depth specification
• Marker read range: 5 ft. (1.5 m) to all ID ball markers
• Marker write range:1 ft. (30 cm)
• Marker depth measurement accuracy: +/- 10% +/- 2 in. (5 cm) up to marker depth specifications
• Display type: Backlit graphic liquid crystal display (LCD) screen
• Marker depth memory storage: Five with date/time stamp
• Power: Battery type: eight AA size, alkaline Typical battery life: 25 hours
• Display: Large graphic high-contrast LCD with backlight
• Speaker: 0.25
• Headphone Jack: Standard mini-jack
• Serial port: Standard RS232 serial with DB9 connector

Preformed Line Products PLP 8006951 COYOTE In-Line RUNT Closure Kit, Hermetically Sealed.

Versatile

The COYOTE† In-Line RUNT Closure has the versatility and features that make it a perfect choice for distribution and fiber-to-the-premise networks.

The compact size allows the closure to be installed into pedestals and small hand holes, keeping your installation costs down. High drop capacity and the capability to be converted to a terminal closure will allow room for expansion long after the initial installation.

Rugged and Reliable

The COYOTE In-Line RUNT Closure is tested in accordance with the demanding requirements of Telcordia GR-771-CORE for all aerial, buried and underground environments.

Manufactured in accordance with ISO 9001:2000 procedures and is backed by the experience and field support that PLP has been noted for since 1947.

Features:

• Compact Size: 17.5" L x 10" W x 3.5" H (44 cm x 25 cm x 9 cm)
• High drop capacity - See grommet chart
• 4 entry ports, each accept 1-1/4" maximum cable diameter
• Hermetically sealed, free breathing, express and flame retardant configurations available
• Quick and easy assembly - no special tools required
• Simple-to-use Grommet sealing system
• Hinged cover reduces number of parts required upon re-entry
• Internal organizer manages buffer tube or ribbon cable
• Integrated air valve to test assembly seal
• Convertible to a COYOTE Terminal Closure with available cover kits - request COYOTE Terminal brochure.
• Full line of mounting hardware available
• Tested in accordance to Telcordia GR-771-CORE

Pole Or Wall Mount Bracket For LG-150/250/350 Closures

The POP 'N' WORK GS fiber optic splicing tent with floor is made of tough urethane coated polyester fabric. Fiber optic splicing tenthas a polyester floor with velcro along all four edges. The tent also has velcro along the bottom edge on all four sides. Floors with corner ties are available for all tents.

Features:

• QUICK SET UP. Just pop out two fiberglass side frames.
• FREE STANDING STABILITY. With the cover fastened to the ground struts, tent stability is exceptional. It will not blow over in windy conditions.
• TWO DOOR MODELS. With the ground strut design, tents with two doors are possible. A two-door tent can be used more efficiently in many work situations, particularly on cabinets and when pole wrapping is required.
• PITCHED ROOF. Provides extra headroom and structural strength to hang heavy tools or lights.
• EASY COVER REPLACEMENT. A unified frame design allows for quick cover removal or installation, significantly reducing tent costs.
• NONBREAKABLE HINGES. Made of cold rolled steel. Plus, all frame rods are bolted at both ends.

Specifications:

• Set Up Size: 6' x 6'
• Folded Size: 9" Dia. X 72"
• Weight: 34 lbs
• Download tent spec sheet pdf

These products may be subject to additional shipping charges due to package size. These charges will be added to your order at the time of actual shipment.

The Multilink Plastic Sno-Shoe has been designed with two purposes in mind.

• The first is to store additional lengths of fiber along the strand for later use.
• The second is to act as a safeguard, protecting the minimum bend radius of the fiber optic cable while establishing proper installation practices.

The Multilink Plastic Sno-Shoe is a durable and cost effective tool for storing fiber optic cable in the air!

Features:

• The plastic material design makes the Sno-Shoe non-conductive
• Countersunk nut wells for easy one tool installation
• The captive design of the patented Cable Trough allows the installer to simply lay the cable in the trough, leaving both hands free to secure the cable unit
• Stackability: the plastic Sno-Shoe can be stacked in multiple cable configurations to accommodate additional fiber mount tiering
• The multiple slots in the patented Cable Trough allow you to secure the cable with either heavy duty tie-wraps or stainless steel straps. These slots also allow you to secure additional cable to the unit in expansion situations without having to remove any of the previously installed cable from the unit and also allows for water and ice drainage.

The 2116-SSPTB is a fixed (non-adjustable) 16" plastic Sno-Shoe with mounting bracket and hardware.