Please note: Minimum order quantity of 12 AND GROUND SHIPMNET ONLY
Abesco FP200 FR Expanding Foam is a single pack Fire Rated polyurethane expanding foam, and is designed to prevent the spread of fire and smoke from one compartment to another through gaps and voids through fire rated walls or floors.
Application Temperature:Min 41F (5C) Surface
68-77F (20C-25C) Can
Can must be inverted for dispensing
Flammable during dispensing
Tack free time:5-10 mins*
Cure time:20-25 mins 1.5" Dia (38mm)*
Hardening time:1.5 - 2 hrs*
Foam when cured has around 60% closed cell content
Specific gravity:22-26 kg/m3
Water absorption:max 1% volume
Temp. resistance:-40F to 194F (-40C to 90C)
Tensile strength:0,071 - 0,076 MPa
Elongation at break:15 - 20%
Free expansion:120%
* depending on temperature and humidity
Flame and smoke index:10 & 35, Class A rating
Flammability class:B1 according to DIN4102 part 1
Storage:9 months 5F to 68F (10C to 20C)
Higher temperatures can shorten storage life. Must be stored in vertical position (upright)
VOC:2% per Council Directive 1999/13/EC 23.6g/l
STC:38
Dielectric Constant (relative static permittivity) 1.2 R:7/inch (2.54 cm)
Application Temperature:Min 41F (5C) Surface
68-77F (20C-25C) Can
Can must be inverted for dispensing
Flammable during dispensing
Tack free time:5-10 mins*
Cure time:20-25 mins 1.5" Dia (38mm)*
Hardening time:1.5 - 2 hrs*
Foam when cured has around 60% closed cell content
Specific gravity:22-26 kg/m3
Water absorption:max 1% volume
Temp. resistance:-40F to 194F (-40C to 90C)
Tensile strength:0,071 - 0,076 MPa
Elongation at break:15 - 20%
Free expansion:120%
* depending on temperature and humidity
Flame and smoke index:10 & 35, Class A rating
Flammability class:B1 according to DIN4102 part 1
Storage:9 months 5F to 68F (10C to 20C)
Higher temperatures can shorten storage life. Must be stored in vertical position (upright)
VOC:2% per Council Directive 1999/13/EC 23.6g/l
STC:38
Dielectric Constant (relative static permittivity) 1.2 R:7/inch (2.54 cm)
This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125µm, 140µm and 230µm cladding.
The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool. Components are for stripping fiber coating/buffer up to 900µm, and jackets up to 3.5 mm.
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC and MU connectors.
Specifications:
Note:
This doesn't work with APC angled connectors. Please check
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC/APC connectors.
Specifications:
Note:
This doesn't work with PC connectors. Please check
This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900µm tight buffer coating to 125µm fiber cladding.
(It doesn't work on 250µm or 400µm coating. Additional fiber guide, fiber guide lock and blade set need to be ordered separately)
This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.
This tool is AA battery-operated for field work, hard to reach areas or for quick fixes.It comes with a blade cleaning brush and a component removal and insertion tool.
