Subscribe to the newsletter to receive updates about new products.
Your cart is empty!
Product descriptionThe FMC media converters are noticed for their simplicity: no management features, guaranteed reliability and extremely affordable cost. Units can be ordered with either SC type or ST type of fiber optic connector. FC optical connector is available on demand.The FMC-10-100-SC02A is a hard to find BiDirectional single strand multi-mode(850/1310nm) fiber media converter equipped with a single SC type optical connector, auto-negotiation 10/100 and MDI/MDI-X features for the Fast Ethernet RJ45 UTP interface. Even without the SNMP management support, FMC series support Link-Fault-Pass through function (LFP - an extremely useful feature to easily debug faulty fiber links), Far-End-Fault function (FEF), acts on a Store-and-Forward switching platform and can carry Jumbo data packets up to 9K size. These extra functions and speed and flow selections can be made through the available DIP switches on the front panel of the media converter.Being a single strand converter, the FMC-10-100-SC02Bmust be paired with the FMC-10-100-SC02A counterpart to obtain a viable fiber link. Models use two wavelengths of 1550 and 1310nm to coexist on same single strand of fiber and they act complementary: A model has Tx:1310nm/Rx:1550nm while B model has Tx:1550nm/Rx:1310nm.Used with their compatible FMC-CH08(8 Slot)or FMC-CH17(17 Slot)fiber optic chassis they can be aggregated up to 17 units in a 19" wide and 2U height space only. The FMC-CH17 chassis is available with single or dual redundat power supplies.In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, is making the FMC series media converters a very clever choice for data carriers and service providers.
The FIB-232A-SC002 provides a fiber converter solution to extend 3 wire serial RS-232 interface transmission up to 2km over multi mode fiber. Unit is also available with longer range optics, multi-mode and BiDi WDM optical modules for operation on single strand fiber optic circuits. The FIB-232A secures data transmission over EMI resistant fiber at speeds up to 230.4kbps for asynchronous RS-232. It is presented in a compact size with wall mounting holes and it is available also with optional DIN rail mounting.
AC adapter is included in the package.Note: Photo is showing SC based optical connectors. The FRM220-SERIAL-ST002 has ST optical connector.Product descriptionThe FRM220-SERIAL-ST002 provides a fiber converter solution to extend RS-232 or RS-485/422 transmission distance up to 2km over multi-mode 62.5/125um or 50/125um fiber. The converter is equipped with multiple interface circuits, for connection to RS-232, RS-423, or RS-485/422 (2 or 4 wire). The FRM220-SERIAL secures data transmission over EMI resistant fiber at speeds up to 256kbps for RS-232 or up to 1024kbps for RS-422/485. When the FRM220-SERIAL is linked to the FRM220series chassis equipped with FRM220-NMCmanagement card , it allows network administrators/engineers to get greater functionality through advanced SNMP/Web/In-band management features. The network administrator can manage any converter module from anywhere on the network, detect any link loss and maintain each loop.The uniqueness of FRM220 series is given by the ability to convert from standalone media converters to cards for FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FRM220 series media converters the perfect choice of media converters by data carriers and service providers.There is only one product (media converter) that does support all three mentioned serial data interfaces. This provides customers with an extra level of flexibility when investing in their network infrastructure.
The IC485IP-1F is a very small size interface converter that allows full conversion between RS-232 and RS-422 or RS-485 interfaces. The converter can operate without any external power supply, getting his voltage from operating interfaces. Device is very simple to install, only DCE/DTE selection switch must be set appropriately for smooth operation.
Features of IC485IP-1F interface converter
Technical specifications
Product descriptionThe FRM220A-1000ES is a 4 port Gigabit Ethernet switch with two 10/100/1000Base-T copper and two SFP slots on a single card. Any 1000Base-SX/LX/LHX/ZX or WDM/CWDM SFP transceiver can be installed in the SFP slots of the FRM220A-1000ES unit. The switch is industrial grade hardened, which means it can safely operate at extreme temperatures such as -40 to +85 Celsius degrees.FRM220A-1002ES supports VLAN settings and QinQ operation. Bandwidth control functions and Digital Diagnostic features for the SFP slots on FRM220A-1002ES are available via local console or SNMP/web when installed in the FRM220 or FRM220A chassis. Other features like Jumbo Packet 10K size support, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test are also available. The FRM220A-1002ES can accommodate any type of miniGBIC (SFP) optical modules, either multi-mode, single-mode or single strand Bi-Directional type. Unit is offering unparalleled flexibility and easy migration from short-haul to long haul fiber connections by simply changing the optical module interface. The Gigabit copper interface has auto-negotiation and speed selection from 10 to 1000 Mbps.The FRM220A-1002ES Gigabit Ethernet switch is extremely versatile. Besides the standard AC powered standalone version, there is a DC48V version available on request as well as a dual AC and DC version. Please contact the sales department by for such versions bye-mailortelephone.NOTE: Pictures show the FRM220A-1002ES unit loaded with SFPs. The SFPs are NOT part of the FRM220A-1002ES product and must be purchased separately.
Product descriptionThe FIB1-T1R-SC15F is a fiber media converter for G.703 T1 transmission/transport and features an RJ-48c connector for connection to 100 Ohm twisted pair wiring. FIB1-T1R-SC15F operates on single-mode fiber up to 15Km (9.3mi) distance. Versions of 30Km and 50Km single-mode 1310nm converters or versions with ST or FC connectors are available on request.The fiber media converter is equipped with dual SC type optical connector. The media converter is also sometimes called T1 fiber modem. When the FIB1-T1R card is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.The uniqueness of FIB1-T1R is given by the ability to convert from standalone media converter to card for FRM301 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FIB1-T1 media converter the perfect choice for media converters by data carriers and service providers.
Product description
The FIB1-1000ES-SM10 Gigabit Ethernet is a singlemode 1310nm FP laser powered fiber media converter for 10/100/1000Base-T to 1000Base-LX conversion that provides NMS functions for Link-Loss-Forwarding, Remote-Monitoring-Status, and Loop-Back-Test. These optional features are especially useful when the standalone units are linked to one of our rack type units with SNMP management.
FIB1-1000ES-SM10 has a Gigabit rate SFP module installed with dual LC connector. The Gigabit copper interface has auto-negotiation and speed selection from 10 to 1000 Mbps
The uniqueness of FIB1-1000ES-SM10 Gigabit Ethernet series is given by the ability to convert from standalone media converters to cards forchassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters.
This simple, but so reliable idea, made the FIB1-1000ES-SM10 Gigabit Ethernet media converter one of the best choices of media converters for data carriers and service providers.
The FRM220-E1-T1-SC002 is a multi-mode 1310nm, 2Km range, dual fiber, E1 or T1 extender. A simple DIP switch sets unit for operation on E1 120Ohms or T1 100Ohms twisted pair copper interfaces. The FRM220-E1-T1-SC002 can extend transparently over fiber any E1/T1 framed or unframed format signal. Unit supports local console, web-based and in-band management including powerful features like Dying Gasp, Remote-Monitoring-Status and Loop-Back-Test. Web and In-band features are available when unit is inserted into the FRM220 in-band managed fiber chassis.The FRM220-E1-T1-SC002 E1 or T1 fiber extender is extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-E1-T1-SC002 media converter is one of the best choices of media converters for data carriers and service providers.Technical specifications
Product descriptionACEU-12V is power adapter with wide AC input 90~240V delivering 12V DC at 0.65Amps for a total power consumption of 7W.AC plug is EU 220V two round pin style.Solution is perfect for quick installation of any of the standalone versions of FRM220, FIB1 or FMC series of fiber media converters.Same adapter can also be used for the IC series of serial converters.This is a separate AC adapter. All our media converters: FMC, FRM220 or FIB1 series INCLUDE this AC adapter in their package.The adapter is sold separately on this page as a back-up adapter for existing units.
Product descriptionThe FRM220-4G-3S media converter has the ability to convert any signaling rate, from 155Mbps to 4.25Gbps, being an Universal Fiber Converter - ideal for any communication standard like: Fast and Giga Ethernet, STM-1, STM-4, STM-16, OC-1, OC-3, OC-12 and OC-48, FDDI or Fibre Channel 1/2/4G. FRM220-4G-3S has management features via SNMP or local console port (telnet) and offers active secondary optical path protection circuitry for optical redundancy. For local console the model must be purchased with a separate casing that offers serial console port, like the FRM220-CH01M or the FRM220-CH02M.The FRM220-4G-3S is a 2R 4G optical regeneration device, which consists of Re-amplification and Re-shaping. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching is supported for the aggregate fiber ports. When the FRM220-4G-3S card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port and perform diagnostic loop backs.FRM220-4G-3S converter cand be used as card into the larger 20 slot FRM220-CH20or 8 slot FRM220-CH08chassis.Features
Product descriptionThe FIB1-T1R-SC20BF is a fiber media converter for G.703 T1 transmission/transport and features an RJ-48c connector for connection to 100 Ohm twisted pair wiring. FIB1-T1R-SC20BF operates on single-mode single strand fiber up to 20Km (14mi) distance. The B type model must always match a complementary A type single strand converter. Versions of 40Km, 60Km or 80Km single strand converters are available on request. B type WDM single strand converter uses Tx: 1550nm and Rx: 1310nm wavelengths.The fiber media converter is equipped with a single SC type optical connector. The media converter is also sometimes called T1 fiber modem. When the FIB1-T1R card is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.The uniqueness of FIB1-T1R is given by the ability to convert from standalone media converter to card for FRM301 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FIB1-T1 media converter the perfect choice for media converters by data carriers and service providers.
Product descriptionThe FRM220-DS3-E3 is an extremely versatile E3 and DS3 over fiber media converter. Any 155Mbps rate optical SFP transceiver can be installed into the single SFP slot of the media converter, offering maximum flexibility for the optical interface. FRM220-DS3-E3 can support operation on E3 75Ohms or DS3 75Ohms dual BNC coaxial copper interface. The FRM220-DS3-E3 can extend transparently over fiber any E3/DS3 signal. Unit supports local console, and future releases will include web-based and in-band mFiber Connectivity Management. The web and In-band features will be available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-DS3-E3 can accommodate any type of miniGBIC (SFP) 155Mbps rate optical modules, either multi-mode, singlemode or single strand Bi-Directional type.The FRM220-DS3-E3 E3 or DS3 fiber extender is extremely versatile, being available in several versions of power supply: embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220chassis, in matter of minutes.Technical specifications
The FRM220-SERIAL-ST002 provides a fiber converter solution to extend RS-232 or RS-485/422 transmission distance up to 2km over multi-mode 62.5/125um or 50/125um fiber. The converter is equipped with multiple interface circuits, for connection to RS-232, RS-423, or RS-485/422 (2 or 4 wire).
The FMC media converters are noticed for their simplicity: no management features, guaranteed reliability and extremely affordable cost. Units can be ordered with either SC type or ST type of fiber optic connector. FC optical connector is available on demand.
Are you sure you want to remove this product from cart?
