CONSUMABLES

3M 261X Aluminum Oxide lapping film, 9" X 13" sheet, grit 3µm.

Pack of 100 sheets.

Aluminum Oxide polishing film.

• Grit: 0.3µm
• Size: 9" x 6.5"
• Color: white

Loctite 7649 Primer N ( Ground Shipment Only)

This item comes in a 1.75 fluid oz bottle.

LOCTITE ACTIVATOR 7649 Primer N is a single component non-CFC solvent based surface activator. The activator is designed to promote the speed of cure of Loctite anaerobic adhesives and sealants such as Loctite 680.

7649 can be used with Loctite 680 (PN:680) on specially designed Anaerobic connectors to increase the cure speed. Please refer to our connector department to get more information about these connectors.Direction for use:

• Inject the 680 Anaerobic adhesive into the connector with a syringe needle, dip or spray the fiber with primer 7649 and connectorize as usual.

99% reagent grade isopropyl is used in cleaning fiber or connector end faces for better transmission performance.

This is a bottle of 28oz. isopropyl alchol. Alcohol must be shipped by ground only and in regulated quantities.

This is the industry's most popular, high-quality fusion splice protection sleeve.

It has a steel strength member, inner fiber tube, and outer shrink tube. After heat shrinking the size is 3.0mm diameter x 60mm length.

It is designed for single fiber applications and accommodates up to 1.4mm coated fibers. The color is clear (transparent).

Fusion splice protection sleeves provide vital protection at the fused juncture between two fusion spliced optical fibers. In addition to providing a substitute for the original fiber optic cable jacket, splice protection sleeves provide a degree of rigidity that prevents the spliced area from bending or flexing. 

One pair of brand new fusion splicer electrodes for Fujikura FSM-17S,18S,50R,50S,60S,60R Fusion Splicer models.

Equivalent Model No: S013532

Epo-Tek 353ND is a two component, heat curing epoxy designed for high temperature applications. It becomes a favorite epoxy of many fiber optic users.

353ND will perform continuously at 20°C and can endure 300~40°C for several minutes. It has excellent resistance to many types of solvents and chemicals and is ideal for bonding fiber optics, metals, glass, ceramics and most plastics.