Product description
The FRM220-DS3-E3 is an extremely versatile E3 and DS3 over fiber media converter. Any 155Mbps rate optical SFP transceiver can be installed into the single SFP slot of the media converter, offering maximum flexibility for the optical interface. FRM220-DS3-E3 can support operation on E3 75Ohms or DS3 75Ohms dual BNC coaxial copper interface. The FRM220-DS3-E3 can extend transparently over fiber any E3/DS3 signal. Unit supports local console, and future releases will include web-based and in-band mFiber Connectivity Management. The web and In-band features will be available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-DS3-E3 can accommodate any type of miniGBIC (SFP) 155Mbps rate optical modules, either multi-mode, singlemode or single strand Bi-Directional type.
The FRM220-DS3-E3 E3 or DS3 fiber extender is extremely versatile, being available in several versions of power supply: embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220chassis, in matter of minutes.
Technical specifications
| Interfaces: | dual 75Ohms BNC copper for E3/DS3 interface and SFP slot for 155Mbps fiber rate communication |
| Connectors: | dual BNC copper and SFP slot 155Mbps |
| Standards: | ANSI, ITU-TS, ETSI, AT&T, G.703, G.921 & G.955 |
| Optical slot: | Small Form Pluggable - supports Auto and Forced mode operation |
| Front LEDs: | PWR, Coax link, coax loop-back, AIS on coax link, FX link, fiber loop-back, AIS on FX link |
| Power: | Embedded 90-260V AC switching power supply with IEC C14 connector and US type main plug power cord |
| Temperature: | 0-60°C (Operating); 0-70°C (Storage) |
| Humidity: | 20 80% non condensing (Operating); 0 90% (Storage) |
| Consumption: | less than 5W |
| Dimensions(WxDxH): | 88mm x 155mm x 23mm |
| Weight: | 950g (without power cord) |
| Compliance: | CE, FCC Class A, LVD, RoHS |
| MTBF: | 65,000 hours |
This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125µm, 140µm and 230µm cladding.
The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool. Components are for stripping fiber coating/buffer up to 900µm, and jackets up to 3.5 mm.
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC and MU connectors.
Specifications:
Note:
This doesn't work with APC angled connectors. Please check
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC/APC connectors.
Specifications:
Note:
This doesn't work with PC connectors. Please check
This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900µm tight buffer coating to 125µm fiber cladding.
(It doesn't work on 250µm or 400µm coating. Additional fiber guide, fiber guide lock and blade set need to be ordered separately)
This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.
This tool is AA battery-operated for field work, hard to reach areas or for quick fixes.It comes with a blade cleaning brush and a component removal and insertion tool.
