Product description
The FRM220-4G-3S media converter has the ability to convert any signaling rate, from 155Mbps to 4.25Gbps, being an Universal Fiber Converter - ideal for any communication standard like: Fast and Giga Ethernet, STM-1, STM-4, STM-16, OC-1, OC-3, OC-12 and OC-48, FDDI or Fibre Channel 1/2/4G. FRM220-4G-3S has management features via SNMP or local console port (telnet) and offers active secondary optical path protection circuitry for optical redundancy. For local console the model must be purchased with a separate casing that offers serial console port, like the FRM220-CH01M or the FRM220-CH02M.
The FRM220-4G-3S is a 2R 4G optical regeneration device, which consists of Re-amplification and Re-shaping. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching is supported for the aggregate fiber ports. When the FRM220-4G-3S card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port and perform diagnostic loop backs.
FRM220-4G-3S converter cand be used as card into the larger 20 slot FRM220-CH20or 8 slot FRM220-CH08chassis.
Features
This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125µm, 140µm and 230µm cladding.
The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool. Components are for stripping fiber coating/buffer up to 900µm, and jackets up to 3.5 mm.
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC and MU connectors.
Specifications:
Note:
This doesn't work with APC angled connectors. Please check
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC/APC connectors.
Specifications:
Note:
This doesn't work with PC connectors. Please check
This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900µm tight buffer coating to 125µm fiber cladding.
(It doesn't work on 250µm or 400µm coating. Additional fiber guide, fiber guide lock and blade set need to be ordered separately)
This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.
This tool is AA battery-operated for field work, hard to reach areas or for quick fixes.It comes with a blade cleaning brush and a component removal and insertion tool.
