The FRM220-E1-T1-SC002 is a multi-mode 1310nm, 2Km range, dual fiber, E1 or T1 extender. A simple DIP switch sets unit for operation on E1 120Ohms or T1 100Ohms twisted pair copper interfaces. The FRM220-E1-T1-SC002 can extend transparently over fiber any E1/T1 framed or unframed format signal. Unit supports local console, web-based and in-band management including powerful features like Dying Gasp, Remote-Monitoring-Status and Loop-Back-Test. Web and In-band features are available when unit is inserted into the FRM220 in-band managed fiber chassis.
The FRM220-E1-T1-SC002 E1 or T1 fiber extender is extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-E1-T1-SC002 media converter is one of the best choices of media converters for data carriers and service providers.
Technical specifications
| Interfaces: | RJ48c copper for E1 120Ohms or T1 100Ohms copper interface and multi-mode 1310nm, 2km fiber port |
| Connectors: | RJ-48c copper and dual SC optical connector |
| Standards: | T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.40, E1: ITU-T G.703, G.704, G.706, G.732, G.823 |
| Optical interface: | 155Mbps supports Auto and Forced mode operation |
| Front LEDs: | PWR, FX-Link, E1/T1 SIG, Test, SYN, RD, TD, AIS |
| Power: | External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug |
| Temperature: | 0 ~ 50°C (Operating); 0 ~ 70°C (Storage) |
| Humidity: | 20 - 80% non condensing (Operating); 0 - 90% (Storage) |
| Consumption: | less than 4W |
| Dimensions(WxDxH): | 85.6mm x 122.6mm x 20mm |
| Weight: | 340g (without AC adapter) |
| Compliance: | CE, FCC Class A |
| MTBF: | 65,000 hours |
This is a Micro-Strip mechanical stripper kit which includes three blade sets: strip to 125µm, 140µm and 230µm cladding.
The MS-FOK-1 Fiber Stripping Kit includes the most-used components for fiber optic stripping, along with complete instructions, cleaning brush and push tool. Components are for stripping fiber coating/buffer up to 900µm, and jackets up to 3.5 mm.
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC and MU connectors.
Specifications:
Note:
This doesn't work with APC angled connectors. Please check
This hand polish puck is made by CNC machines for repeated quality and accuracy. The unique design prevents vapor locking and surface tension so your connectors are polished properly.
This puck can work with LC/APC connectors.
Specifications:
Note:
This doesn't work with PC connectors. Please check
This SOFT-STRIP thermal stripper contains a heating element which softens and strips 900µm tight buffer coating to 125µm fiber cladding.
(It doesn't work on 250µm or 400µm coating. Additional fiber guide, fiber guide lock and blade set need to be ordered separately)
This stripper permits precise stripping with less than 1lb of peak pulling force for a single fiber which makes it perfect for use on fiber optic couplers and other delicate components.
This tool is AA battery-operated for field work, hard to reach areas or for quick fixes.It comes with a blade cleaning brush and a component removal and insertion tool.
