Products

LC male-to-female attenuators contain doped fiber suitable for both 1310nm and 1550nm operation. Fixed attenuation values are available in 1dB increments from 1 to 20dB.

All Fiber Optics For Sale Co. attenuators are built with the highest quality materials and factory tested to ensure precise attenuation and performance.

The capacity ofSFM-7000-L31optical module is1.25Gbps(Gigabit rate). The XR transceiver (eXtended Range) allows operation on either50/125um or 62.5/125um multi-modefiber for up to2Kmdistance. The fiber standard for SFM-7000-L31 is1000Base-SX.
All the managedFIB1-1000ESandFIB1-1000TSas well as unmanagedFMC-1000ESandFIB1-1000DSseries of standalone Gigabit media converters can be equipped with miniGBIC/SFP optical modules.
SFP's or miniGBIC modules are extremely versatile, working with any active equipment that support the SFP type of interface: Ethernet switches, routers and any other networking equipment. Our SFPs have been tested and found 100% compatible with various Ethernet switches from major manufacturers like: Cisco, Nortel, Extreme, ZyXEL, D-Link or Netgear.

1x4 Single Mode PLC Splitter (Planar Lightwave Circuit Splitter) with Fan Out & SC/APC Connectors

PLC stands for Planar Lightwave Circuit. PLC splitters are used to distribute or combine optical signals. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability.

PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size, these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems.

Installation is simple using a variety of connector types or fusion splicing.

Applications:

• LAN, WAN & Metro Networks
• Telecommunication Networks
• Passive Optical Networks
• FTT(X) Systems
• CATV
• Value Added Module

Product Features:

• Singlemode PLC Splitters in a variety of package types and configurations
• Optical performance 100% factory tested
• UPC, and APC polish types available for connectorized products
• Low Insertion Loss, Back Reflection and PDL
• Telcordia GR-CORE 1221 certified

Product Specs:

• Operating Window: 1260~1600nm
• Polarization Stability (dB): „_ 0.50dB
• Port Configuration: 1x4, 1x8, 1x16, 1x32
• Back Reflection (dB): „_ -55 UPC „_ -65 APC
• Operating Temperature (†­C): -20~+70
• Storage Temperature (†­C): -40~+85
• Package size: 8 x 8.1 x 5.2 mm

Product description
The capacity ofSFS-7010-L31module is1.25Gbps(Gigabit rate). The transceiver is able to work on9/125um single-modefiber for up to10Kmdistance. The fiber standard for SFS-7010-L31 is1000Base-LX.
All the managedFIB1-1000ESandFIB1-1000TSas well as unmanagedFMC-1000ESandFIB1-1000DSseries of standalone Gigabit media converters can be equipped with miniGBIC/SFP optical modules.
SFP's or miniGBIC modules are extremely versatile, working with any active equipment that support the SFP type of interface: Ethernet switches, routers and any other networking equipment. Our SFPs have been tested and found 100% compatible with various Ethernet switches from major manufacturers like: Cisco, Nortel, Extreme, ZyXEL, D-Link or Netgear.
Fiber power budget according to available models
(highlighted model is one available for purchase on this page)

The Clip-On Variable Fiber Optic Attenuator is a completely passive device, which works by physical attenuation of a 3mm jacketed singlemode cable.

It may also be used with smaller jacket sizes. However, attenuation performance may vary.

The clip-on attenuator can be attached at any point in a fiber cable, providing attenuation levels from 0 to >47dB at 1550nm, 0 to >21dB at 1310nm, and low back reflection.

This attenuator is good for hundreds of uses, and leaves no lasting effects on the cable.

Dimensions: Length = 1 1/2", Diameter = 3/4"

1x32 Single Mode PLC Splitter (Planar Lightwave Circuit Splitter) with Fan Out & SC/APC Connectors

PLC stands for Planar Lightwave Circuit. PLC splitters are used to distribute or combine optical signals. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability.

PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size, these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems.

Installation is simple using a variety of connector types or fusion splicing.

Applications:

• LAN, WAN & Metro Networks
• Telecommunication Networks
• Passive Optical Networks
• FTT(X) Systems
• CATV
• Value Added Module

Product Features:

• Singlemode PLC Splitters in a variety of package types and configurations
• Optical performance 100% factory tested
• UPC, and APC polish types available for connectorized products
• Low Insertion Loss, Back Reflection and PDL
• Telcordia GR-CORE 1221 certified

Product Specs:

• Operating Window: 1260~1600nm
• Polarization Stability (dB): „_ 0.50dB
• Port Configuration: 1x4, 1x8, 1x16, 1x32
• Back Reflection (dB): „_ -55 UPC „_ -65 APC
• Operating Temperature (†­C): -20~+70
• Storage Temperature (†­C): -40~+85
• Package size: 8 x 8.1 x 5.2 mm

This Variable Attenuator uses collimator lens technology enabling the user to change attenuation through the twist of a top-mounted screw.

Use this variable attenuator to simulate the loss in a fiber system or testing your system's dynamic range. A power meter and light source can be used to determine the fixed attenuation value your system requires.

The attenuator has a 0.6 dB typical insertion loss and is available in a 2 meter length and may be connectorized.

• Adjustable Attenuation in 0.5dB Increments
• Attenuation Levels 0.8dB to 80dB
• Easy-to-Adjust via Top Mounted Screw
• Typical Insertion Loss 0.8dB
• Terminate with Singlemode Connectors of Your Choice

Loctite 7649 Primer N ( Ground Shipment Only)

This item comes in a 1.75 fluid oz bottle.

LOCTITE ACTIVATOR 7649 Primer N is a single component non-CFC solvent based surface activator. The activator is designed to promote the speed of cure of Loctite anaerobic adhesives and sealants such as Loctite 680.

7649 can be used with Loctite 680 (PN:680) on specially designed Anaerobic connectors to increase the cure speed. Please refer to our connector department to get more information about these connectors.Direction for use:

• Inject the 680 Anaerobic adhesive into the connector with a syringe needle, dip or spray the fiber with primer 7649 and connectorize as usual.

Note: The OLPS-4RM-DD chassis includes two OLPS-4RM-DC48 power supplies with DC 36-72V input. OLPS-35 protection cards are NOT included with the OLPS-4RM-DD chassis.

Product description
The OLPS-4RM-DD is a high performance high density Optical Line Protection System for critical fiber optic transmission circuits. The chassis can hold up to 8 independent OLPS-35 1:1 optical protection cards. The chassis occupies 4RU of rack space offering double the density of the standalone OLPS-RM-35-AD system while bringing the cost per OLPS 1:1 protection system at the best value. The management system available on the 8 slot chassis allows management of all the OLPS-35 cards with a single IP address. The 1:1 protection system has the advantage of a very low insertion loss compared with 1+1 protection systems. The OLPS-35 cards offers only 1.2dB of insertion loss, making them a favored protection choice for tight optical budget applications.

The OLPS is an automatic system that switches fiber communication from a main fiber line to an alternate backup fiber when the main line communication is disabled. This is done by constantly monitoring the optical level of the main line. When signal level gets under a set threshold, communication is diverted on the secondary path in less than 35 miliseconds. Unit has management available via console and SNMP. Management allows set-up of threshold optical level for switching and behavior for recovery: automatic reverting to main when signal is restored, manual revert or no switch. The new OLPS-4RM chassis offers 19" rack mounting brackets with only 4RU of space used, saving vital rack space when necessary. The 8 slot OLPS rack can be loaded with OLPS-35 1:1 protection cards.

The OLPS chassis provides redundant power supply system with "hot swap" feature, to provide continuous operation. It can accomodate both AC (110V) and DC (48V) power supply units, either in mixed or same type of power input.

Technical specifications
 

Note: Picture shows a fully loaded chassis. Only the chassis is sold under this part number.

Product description
The new SML-4000-CH high density chassis occupies 4RU space in a 19" rack and holds up to 24 different/independent CWDM or DWDM mux/demux cards from the SML-40 series. Each mux/demux card can be used as standalone or can be installed in one of the SML-4000 chassis 24 slots.

The SML-4000-CH is a rack 19" solution for very high density of CWDM or DWDM filters in a telecom rack. The solution is offering unparalleled density of CWDM or DWDM filters per unit of rack space. All CWDM or DWDM filters can be customized upon customer needs according to number of channels, specific wavelengths, expansion and monitor ports and type of connectors.

Note: Only the chassis is sold under this part number.

Product description
The new SML-1000-CH chassis occupies only 1U space in a 19" rack and holds up to 4 different/independent CWDM mux/demux cards from the SML-1000 series. Each mux/demux card can be used as standalone or can be installed in one of the SML-1000 chassis 4 slots.

The SML-1000-CH is a rack 19" solution for higher density of CWDM or DWDM filters in a telecom rack. CWDM or DWDM filters can be customized upon customer needs.

99% reagent grade isopropyl is used in cleaning fiber or connector end faces for better transmission performance.

This is a bottle of 28oz. isopropyl alchol. Alcohol must be shipped by ground only and in regulated quantities.

This is the industry's most popular, high-quality fusion splice protection sleeve.

It has a steel strength member, inner fiber tube, and outer shrink tube. After heat shrinking the size is 3.0mm diameter x 60mm length.

It is designed for single fiber applications and accommodates up to 1.4mm coated fibers. The color is clear (transparent).

Fusion splice protection sleeves provide vital protection at the fused juncture between two fusion spliced optical fibers. In addition to providing a substitute for the original fiber optic cable jacket, splice protection sleeves provide a degree of rigidity that prevents the spliced area from bending or flexing. 

Features:

• 4-PORT MODULAR FURN UNLOADED SNAP-ON HERMAN MILLER MINI-COM ULTIMATE ID BLK ROHS
• Faceplate snaps into standard knockouts found on modular furniture. Holds up to four Mini-Com Modules. See panel cutout requirement.
• Ultimate ID(TM) components are part of a complete system for identification designed to efficiently support TIA/EIA-606-A standard labeling requirements
• Accepts Mini-Com(TM) Modules for STP and UTP, fiber optic, and audio/video, which snap in and out foreasy moves, adds, and changes
• Supplied with clear station and port label covers, labels sold separately
• Can be clearly identified with the PanTher(TM) LS8E or Cougar(TM) LS9 Hand-Held Thermal Transfer Printers
• Computer printable label sheets for desktopprinters and write-on labels available
• Replacement label covers available
• Optional icons available
• Fits standard furniture openings

1-Port Mod Jack 8W8P 110 T568A/B CAT5e IP1, Blue

PA-901053 Paladin Tools CAT5 Installation DataReady Kit

The Paladin Tools 901053 DataReady tool kit includes everything needed to install CAT 5 cables -- all in a convenient zippered case. This Category 5 datacom tool set includes all-in-one crimper, punch down tool, data cable cutter, continuity tester, and 20 RJ45 connectors.

If you're installing CAT 5 cables, get the job done right with the Paladin Tools DataReady tool kit.

The Greenlee Paladin Tools PA-901053 DataReady Tool Kit is a complete solution for CAT 5e terminating. Crimper allows you to crimp, cut and strip RJ45, RJ11/RJ12 and RJ22 handset plugs, plus cut and strip 28- to 22- AWG round UTP/STP phone, data, and flat satin cable.

Paladin Kit also includes the SurePunch punchdown tool with 66/110 blade, Data SureStrip cutter/stripper, 20 RJ45 connectors, the LAN ID continuity tester and Cable Check network identifier. Complete kit organized in a soft zipper case.

Use the Paladin Tools 901053 premium DataReady Tool Kit for CAT 5e telecom terminating jobs. The 1556 WE/SS Low-Cost All-in-One Data and Telephone Tool has crimping cavities for RJ45, RJ11/RJ12 and RJ22 handset modular plugs. Use it to cut and strip 28- to 22-AWG round UTP/STP phone and data cable plus flat satin phone cable. The SurePunch PDT reduces time and effort. Soft, rubber-embedded handle with cushioned heel decreases hand strain. Includes 66/110 reversible blade.

• Data SureStrip Cat5e, Cat6, Phone Cutter/Stripper
• All-in-One Data & Phone Tool (WE/SS-style)
• SurePunch Handle
• 110/66 Blade - SurePunch & SurePunch Pro PDTs
• Data/Link ID and Cable-Check
• RJ45 WE/SS 8P8C Modular Plugs(Cat5e, Cat5) - 10 pack

Features:

• Industry Standards.RoHS/ELV Compliance: RoHS compliant, ELV compliant
• Industry Standards.Lead Free Solder Processes: Not relevant for lead free process
• Body Features.number of Positions: 25
• Packaging Features.Packaging Method: Bulk
• Housing Features.UL Flammability Rating: UL 94V-0
• Housing Features.Housing Color: Black
• Housing Features.Connector Style: Receptacle
• Product Type Features.Product Type: Connector
• Contact Features.Contact Type: Socket
• Product Type Features.Shell Size: 3
• Packaging Features.Packaging Quantity: 100
• Body Features.Cable Exit Angle: Straight(180)/120
• Contact Features.Preloaded: Yes
• Electrical Characteristics.Shielded: No
• Product Type Features.Grade: Standard
• Product Type Features.Grommets: Without
• Product Type Features.Cable Clamp Type: One-Piece Quick Snap
• Body Features.Cable Insulation Diameter (mm [in]): 4.57 11.68 [0.180 0.460]
• Housing Features.Housing Material: Nylon, Polyester GF
• Product Type Features.Product Series: HDP-20 (Crimp Snap)
• Product Type Features.Shell Type: Full Metal Shell
• Termination Features.Solder Tail Contact Plating: Tin over Nickel
• Contact Features.Contact Base Material: Phosphor Bronze
• Product Type Features.Mating Connector Lock Type: Mounting Screws, Retainer Clip
• Product Type Features.Mating Connector Lock: With
• Contact Features.Contact Plating, Mating Area, Material: Gold Flash
• Product Type Features.Screw Material: Steel
• Mechanical Attachment.Mounting Screw Material: Steel
• Mechanical Attachment.Screw Plating: Zinc
• Product Type Features.Retainer Clip Material: Stainless Steel
• Product Type Features.Screws and Retainer Clips: With
• Product Type Features.Strain Relief Clip Material: Stainless Steel
• Body Features.Wire Range (mm [AWG]): 0.2 - 0.56 [24-20]
• Mechanical Attachment.Mounting Screw Plating: Zinc
• Product Type Features.Cover Material: Polypropylene
• Body Features.Cable Gate Plug Material: Polypropylene

Hitachi CAT5e UTP (Unshieled Twisted Pair) Bulk Copper Cable. Riser Rated (CMR). 1000 Feet/Box. Brown Color Jacket.

CAT5e UTP & Cat 5E+ UTP FEATURES:

• CAT5e meets or exceeds all of the ANSI/TIA-568-C.2 Specifications
• 10BASE-T to 1000BASE-T Ethernet, ATM and Token Ring applications
• CAT5e+ and CAT5e offer increased headroom for improved channel performance
• Standard lengths are 1,000 feet (305 meters)
• 24 AWG, solid conductors

One pair of brand new fusion splicer electrodes for Fujikura FSM-17S,18S,50R,50S,60S,60R Fusion Splicer models.

Equivalent Model No: S013532